Huawei Y6 Prime 2019 MRD-LX1F FRP Remove With SP Flash Tool Free 100% Tested

 

Hello Tech Experts! Today I will share Huawei Y6 Prime 2019 (MRD-LX1F) FRP Lock Remove File & Manual Format Address for SP Flash Tool. This method is 100% tested and free without any box or dongle. Just follow the instructions below safely.

📱 File Information

Device Model:	Huawei Y6 Prime 2019 (MRD-LX1F)
CPU Chipset:	MediaTek MT6761 (Helio A22)
Tool Required:	SP Flash Tool & MTK Bypass Tool
Password:	No Password (FREE)

🔑 MRD-LX1F FRP Format Address:

Physical Start Address: 0x11080000

Partition Size: 0x100000

How to Reset FRP Using SP Flash Tool:

1. Download the MRD-LX1F Scatter & DA File from the links below and extract them.
2. Open SP Flash Tool, load the Scatter file, and select the Custom DA file.
3. Go to the Format tab and select Manual Format Flash.
4. Copy and paste the Start Address and Format Length from the box above.
5. Run MTK Auth Bypass Tool and click on Crash PL / Bypass Auth.
6. Connect the phone via Test Point (TP) with a USB cable.
7. Once the Auth tool detects the phone in "BROM" mode, go back to SP Flash Tool and click Start.
8. Within 2 seconds, you will see a green Format OK tick mark!

🚀 SERVER 1 — FAST DOWNLOAD
📁 SERVER 2 — DIRECT DOWNLOAD